Through hole drilling (including through holes): Through hole drilling or through holes means that all boreholes are connected from top to bottom to each layer.
Blind hole: Blind hole refers to the connection between the top or bottom layer and the inner layer through a through-hole, as shown in the following figure.
Buried hole: Buried hole refers to all through holes connected to the inner layer. The buried hole will never connect to the outer layer.
Stacked via: Stacked via is defined as a through-hole connected in a straight line from the outer layer to the inner layer for the easiest wiring and correct electrical connection.
Interlocking via: Interlocking via refers to a via that is not connected to adjacent layers in a straight line. Its connection with adjacent layers has a certain angle, as shown in Figure 2.
Micro pores: Micro pores are pores smaller than 0.15 millimeters. Stacking and interleaving are both micro vias, which generally exist on HDI multi-layer PCBs.
mobile phone: 86-15113315665
Contact: Chen Changhai
mobile phone: 86-18676922028
E-mall: haibo_fpcba1668@163.com
Address: 3rd Floor, Building 2, Fuxing Industrial Park, Building B, Chuangye 1st Road, Jiangbian Community, Songgang Street, Bao'an District, Shenzhen